KDT11003FKUser ManualENDishwasher
• The cap of the salt container is tight.• The spray arms are not clogged.• There is dishwasher salt and rinse aid (unless youuse multi- tablets).• Th
Internal cleaning• Carefully clean the appliance, including the rubbergasket of the door, with a soft damp cloth.• If you regularly use short duration
Problem and alarm code Possible cause and solutionThe program lasts too long.• If the delayed start option is set, cancel the delay setting orwait for
Problem Possible cause and solutionThe dishes are wet.• The programme does not have a drying phase or has a drying phasewith low temperature.• The rin
Capacity Place settings 13Power consumption Left-on mode (W) 0.50Power consumption Off-mode (W) 0.501) Refer to the rating plate for other values.2) I
www.electrolux.com/shop100011870-A-182015
ContentsSafety information 2Safety instructions 3Control panel 4Programmes 5Settings 5Before first use 7Daily use7Hints and tips 9Care and cleaning 10
• If the supply cord is damaged, it must be replaced by the manufacturer, itsAuthorised Service Centre or similarly qualified persons in order to avoi
Use• Do not sit or stand on the open door.• Dishwasher detergents are dangerous. Obey thesafety instructions on the detergent packaging.• Do not drink
ProgrammesProgramme Degree of soilType of loadProgramme phases Consumption values1)Duration(min)Energy(kWh)Water(l) 2)Normal soilCrockery and cut-lery
User modeWhile the appliance is in programme selection mode:1. Press and hold programme button until the indicator starts to flash and the indicator
2. Wait until the indicator goes off. The indicator is off. The acoustic signal is off.3. Press programme button to change the setting. The indica
Adding detergent212030ABIf the programme has a prewash phase, put a small quantity of detergent also in compartment B.Adding multi-tablets212030• Do n
If you do not press the on/off button, after few minutes from the end of the programme all theindicators go off. This helps to decrease the energy con
Commenti su questo manuale